A white emulsion which on application converts into a black corrosion protection coating.
| Application Temp | GT RUST CONVERTER can be applied at 4 C to 40 C and is also applicable on damp rust. The optimum range is 15 C to 28 C |
| Salt Spray Test | GT RUST CONVERTER conforms to DIN 53 167 and DIN 50 021 at film thickness of 90 microns 500 hours without rust |
| Drying Time | GT RUST CONVERTER is normally dry after 30 to 60 minutes at 20 C/70% humidity; GT RUST CONVERTER can be painted or varnished after 24 hours (at 20 C); GT RUST CONVERTER can be further applied after one hour. |
| Heat Tolerance | GT RUST CONVERTER can be used up to 80 C, and for short periods up to 150 C (of dry coating) |
| Thinning | GT RUST CONVERTER can be thinned with clean water up to 10% maximum |
| Coverage | GT RUST CONVERTER covers approx 100-150 g/m2 at thickness of 50 microns |
| Chemical resistance | GT RUST CONVERTER has good resistance to weak alkalies, acids and non-aggressive oils |
| Flash point | GT RUST CONVERTER is non-flammable |
Hands and equipment can be cleaned with water providing GT RUST CONVERTER is still viscous. If GT RUST CONVERTER is dry and black, use a suitable safe solvented cleanser.
